CHR Primary SG23 Glass PTFE
Saint-Gobain Performance Plastics Primary SG23 is fiberglass fabric impregnated with PTFE (polytetrafluoroethylene) dispersion and coated with high-temperature, pressure-sensitive acrylic adhesive.
SG23 is a very durable and versatile product. The combination of PTFE, fiberglass and a high- temperature acrylic adhesive allows SG23 to perform in continuous temperatures up to 350°F.SG23 is dimensionally stable and resistant to tears, punctures, abrasion and wear. It will not“cold flow” under heavy loads.
SG23 is available in 3, 5, 6, and 10 mil thicknesses and widths from 1/4" to 39" wide. Standard roll length is 18 or 36 yards long. SG23 is available with or without a liner.
Saint-Gobain Performance Plastics Primary SG23 is frequently used by the packaging industry as a release surface on heat sealers, blister formation and form-fill-seal equipment. The durability and anti-stick properties of SG23 also make it an ideal material for the lining of guide rails, chutes and slides. The high-temperature capabilities and non-stick properties of SG23 allow it to perform as an excellent release surface in the composite aircraft industry.
Saint Gobain - CHR Primary SG23 Glass PTFE - CHR Primary SG23 Glass PTFE
|Sku||Backing Thickness (in.)||Color||Backing Material||Adhesive Type||Elongation (% at Break)||Adhesive Thickness (in.)||Adhesion to Steel (in.)||Operating Temperature (°F)||Total Thickness (in.)|
|SG23-03||0.0030||Natural||PTFE Coated Fiberglass Fabric||Acrylic||< 5||0.0020||60||-40 to 350||0.0050|
|SG23-05||0.0050||Natural||PTFE Coated Fiberglass Fabric||Acrylic||< 5||0.0020||70||-40 to 350||0.0070|
|SG23-06||0.0060||Natural||PTFE Coated Fiberglass Fabric||Acrylic||< 5||0.0020||75||-40 to 350||0.0080|
|SG23-10||0.0060||Natural||PTFE Coated Fiberglass Fabric||Acrylic||< 5||0.0020||70||-40 to 350||0.0080|